Products > Ceramic filter plate > filter box for filtration of molten aluminum

filter box for filtration of molten aluminum


The ceramic filter plate is made of advanced inorganic membranes. The pore diameter is between 0.5-5 microns and is composed of many evenly distributed micropores. The water permeability is good.
The water injection rate is 1200kg/h-1500kg/h.㎥, and the backlash pressure is as high as 0.15 MPa or more, when the fluid flows through these small holes and mineral particles, by maintaining the
surface of the filter medium.

The ceramic foam filter plate is an economical and convenient way to remove aluminum water inclusions. It is widely used in filtering aluminum water. The ceramic foam filter plate can provide sizes
from 7 inches to 26 inches, and the through-hole size from 20ppi to 60PPI. The periphery of the plate is lined with 8mm aluminum silicate, which is used as a seal between the contact part of the filter
plate and the filter box to ensure that there is no side flow of aluminum liquid.



Instructions:


The ceramic filter plate is made of advanced inorganic membranes. The pore diameter is between 0.5-5 microns and is composed of many evenly distributed micropores. The water permeability is good. 
The water injection rate is 1200kg/h-1500kg/h.㎥, and the backlash pressure is as high as 0.15 MPa or more, when the fluid flows through these small holes and mineral particles, by maintaining the
surface of the filter medium.